RU | EN
contact phone +7 (4922) 47-47-41
About Us Products Application Quality Training and Service News Contact Feedback

Deep filter element of EPV grade on the basis of polypropylene fibers connected by pneumoextrusion method. For economical prefiltration.

 

 

Description

 

EPV filter elements are cartridge-type elements based on a continuous polypropylene fiber thermally bonded (using meltblown technology), including a grooved structure (EPV-P / 100/1000 grade). The use of a special technological approach ensures an increasing matrix density in the direction from the cartridge surface to the central channel. Thus, due to the uniform distribution of differently sized particles of contaminants held in different filter layers as the product moves through the cartridge, the life of the filter element increases.

 

Features & Benefits

 

The multilayer structure provides increased mud capacity and resource.

Low hydraulic resistance.

Perforated polypropylene outer shell increases the strength and durability of the element to mechanical loads.

Low cost.

 

Main applications

 

In various industries for pre-treatment of process water in front of reverse osmosis systems, for pre-filtration, to remove particles from air and compressed gases.

 

Filter Cartridge Materials

 

Filter material

Polypropylene

Drainage layer

Polypropylene

Housing, end parts, adapter

Polypropylene

Standard O-rings

Silicone (others on request)

 

Geometric characteristics

 

Cartridge filter elements

 

Height (L), mm

Diameter (D), mm

125 (5")

70

250 (10")

70

500 (20")

70

750 (30")

70

1000 (40")

70

 

 

Height (L), mm

Diameter (D), mm

250 (10")

94

 

Mikron rating

 

Micron rating, micron

Order code

1

100

10

1000

20

2000

Operating parameters

Maximum differential pressure for cartridges, MPa

0.4 at 20 ° C, 0.17 at 60 ° C

Maximum differential pressure for capsules, MPa

0.4 at 20 ° C, 0.2 at 60 ° C

Maximum reverse differential pressure, MPa

0.2 at 20 ° C, 0.05 at 60 ° C (cartridges)

Maximum operating temperature, ° С

60°С

Rinsing in a straight stream

Hot water (up to 70 ° C), chemicals

Autoclaving

121 ° C, 0.11 MPa, 30 min.

Steam sterilization

Not recommended

 

 

Information for ordering EPVP

 

EPVP

500

А1

1000

Make

Mikron rating

 

Nominal length

 

100 = 1 μm

1000 = 10 μm

2000 = 20 μm

100/1000 = 1 μm (with furrowed structure)

А (А1), А4, D (D1), В, ВSl

100 = 100 mm

125 = 125 mm
150 = 150 mm
250 = 250mm (10")
500 = 500mm (20")
750 = 750mm (30")
1000=1000mm(40")

Information for ordering capsules KFVP

KFVP

1000

К

250

Make

Mikron rating

Connection type

Filter element height

 

100 = 1 μm                                                   

1000 = 10 μm

2000 = 20 μm 

100/1000 = 1 μm (with furrowed structure)

K-sanitary flanged                                           

250 mm (10 ")


Back to top