RU | EN
contact phone +7 (4922) 47-47-41
About Us Products Application Quality Training and Service News Contact Feedback

Membrane filters of mark EPM.F on the basis of hydrophobic fluoroplastic for fine filtration of air, gases and aggressive liquids

Home - Products - Filter cartridges - Filter cartridges - Membrane filter elements cartridge type (cartridges) - Membrane filters of mark EPM.F on the basis of hydrophobic fluoroplastic for fine filtration of air, gases and aggressive liquids

 

Description

 


Membrane filtering elements EPMM are produced on the basis of a two-layer hydrophobic fluoroplastic (PVDF + PTFE) membrane with a pore size of 0.45-0.8 μm. Filter elements have high throughput, chemical resistance to acids and solvents, are recommended for fine filtration of gaseous media and corrosive liquids.

Materials filterpatrone

The main membrane

A hydrophobic fluoropolymer (PVDF+PTFE)

Pre-filter membrane

A hydrophobic fluoropolymer (PVDF+PTFE)

Drainage layer

Polypropylene

Housing, end parts, adapter

Polypropylene

Standard o-rings

Silicone (others on request)

Key specification

Pore size, µm

Code for order

0,45

/045

0,65

/065

0,8

/080

Geometric characteristics

Cartridge filter elements

Height (L) mm

Diameter (D) mm

filtering Area (S), m2

125 (5")

70

0.32

250 (10")

70

0.62

500 (20")

70

1,24

750 (30")

70

1.86

1000 (40")

70

2.48

 

Capsule filters

Height (L) mm

Diameter (D) mm

filtering Area (S), m2

250 (10")

94

0.62

125 (5")

94

0,3

60 (2,5")

94

0.12

The operating parameters

Maximum differential pressure for cartridges, MPa

0.5 at 20°C and 0.2 at 80°C

Maximum differential pressure for capsules, MPa

0,4 at 20°C 0.2 at 60°C

The maximum temperature of operation, °C

80°C (cartridges), 60°C (capsules)

The recommended gas flow rate (at P 7 ATM), per unit height of 250 mm, m3/h

300

Autoclaving

121°C, 0.11 MPa, 30 min, 50 cycles (rounds)

The sterilization (only cartridges)

121°C, 0.11 MPa, 30 min., 10 cycles (capsule)

* For detailed instructions on cleaning and sterilization and capsules  recommended refer to the technical specialists of NPP "Technofilter".

Quality and Safety

 

Elements cartridge of EPM.F are produced in accordance with regulatory and technical documents for product quality and certified for use in the filtration of biological products and food products. All EFMS are subjected to 100% integrity control.

Washing, control, drying, final assembly and packaging of membrane filter elements is carried out in special clean zones (Cleanliness class 6 and 7) according to the classification of clean rooms in the pharmaceutical industry in accordance with EU GGMP (Good Manufacturing Practice) .

Membrane filtering elements EPM.F are tested for bacterial and toxicological safety, materials used in the design of filters have a minimum amount of extracted components and are allowed to contact with intravenous drugs and food. The safety of filter elements is established by a series of sanitary-chemical and toxic tests conducted in accordance with GOST R ISO 10993.1-99, GOST R ISO 10993.5-99, GOST R ISO 10993.10-00, "Collection of guidelines for toxicological and hygienic research of polymeric materials and products on their basis of medical designation ", Ministry of Health of the USSR. 1987

 

The integrity test

Indicators of test values in the test of EPM.F on the integrity with the use of automatic control systems

Mark

The pressure of the "bubble point" for ethanol, MPa (bar), min.

EPM.F-/045

0,036 (0,36)

EPM.F-/065

0,03 (0,3)

EPM.F-/080

0,02 (0,2)

* All values are for elements with a height of 10"(250 mm).

Ordering information  recommended the EPM.F

ЭПМ.Ф

045

Д1

250

М

Марка

Micron rating

 

nominal length

application

 

045=0,45 мкм
065=0,65 мкм

080=0,8 мкм

Д, Д1, А1, А4

100 = 100 mm

125 = 125 mm

250 = 250mm (10")

500 = 500mm (20")

750 = 750mm (30")

1000=1000mm(40")

M = medicine and Biopharmaceuticals

N = nutritional direction

E = microelectronics 

Order information capsules FMC.F

KFM.F

045

Р

60

Mark

Micron rating

connection type

The height of the filter element

 

045=0.45 µm

065=0.65 µm

K-sanitary flange

R-threaded conical (for height 60mm)

60 mm

125 mm

250 mm


Back to top